CSIA-certified sweeps, honest pricing, no mess left behind

Wood stove chimney cleaning Lawrence IN done right the first time

When you need wood stove chimney cleaning Lawrence IN, EmberHarbor Pros sends a CSIA Certified Chimney Sweep who has worked on hundreds of wood stoves across Marion County. We remove creosote, soot, and blockages from your flue, inspect the liner and firebrick, and leave your stove burning clean and safe. If your glass is blackening or smoke rolls back into the room, call us today.

↗
Fast online booking

Request service today

Tell us what is happening. Our local team will confirm your visit shortly.

Call Now (855) 959-5820 → No spam. No obligation. Just practical help.
wood stove chimney cleaning by EmberHarbor Pros
Careful work. Honest options.
About this service

What wood stove chimney cleaning Lawrence IN really involves

Wood stove chimney cleaning Lawrence IN is the mechanical removal of creosote, soot, and debris from the flue, connector pipe, and firebox of a wood-burning stove. We run a chimney brush on flexible chimney rods through the full height of the flue, then vacuum the firebox and stovepipe with a HEPA vacuum so no ash escapes into your living room. The job also includes a visual check of the flue tiles, chimney cap, and firebrick for cracks or gaps that let smoke and heat escape.

Lawrence homeowners burn hardwood from October through March, and that steady use builds creosote fast. A stove that ran all last winter can carry a quarter-inch of glazed creosote in the flue by spring, which is the leading cause of chimney fires. If you are searching for wood stove chimney cleaning near me Lawrence IN, we schedule same-week visits across Marion County and bring drop cloths, an ash vacuum, and an inspection camera to every call.

  • ✓ Lower chimney fire risk
  • ✓ Better heat, less wood
  • ✓ No more smoke backdraft
  • ✓ Longer stove and liner life
What's included

What is included in wood stove chimney cleaning

Every wood stove cleaning covers the full flue, firebox, and stovepipe, plus a camera inspection and written report. Repairs and parts are quoted separately so you never pay for work you did not approve.

✓

Full flue brushing

We brush the entire flue from the cap down to the firebox using chimney rods and a wire brush sized to your flue. Glazed creosote gets extra passes and a creosote sweeping log treatment. This is the step that removes the fire fuel.

✓

Firebox and pipe vacuuming

A HEPA vacuum pulls ash and soot from the firebox, baffle, and connector pipe. We scrape the firebrick and wipe the glass. The goal is a firebox you could eat off, though we do not recommend it.

✓

Camera inspection

An inspection camera runs the full height of the flue to check flue tiles, mortar joints, and the stainless steel liner. We photograph anything questionable and show you the images. Cracks and gaps get flagged before they become a carbon monoxide problem.

✓

Cap, crown, and gasket check

We inspect the chimney cap, crown, flashing, and door gasket. A missing cap lets rain and animals in, and a flat gasket leaks smoke. We note what we find and can replace caps, crowns, and gaskets the same visit.

✓

Written report and photos

You get a one-page report listing what we cleaned, what we inspected, and what needs attention. Photos are attached for anything we recommend repairing. It is your record for insurance, resale, or your own peace of mind.

How it works

What to expect on service day

01

Hearth protection

We lay drop cloths from the door to the stove and tape a HEPA vacuum hose at the firebox. Your floors, rugs, and furniture stay covered. This setup takes about 10 minutes and is the reason you will not find a speck of ash on the carpet when we finish.

02

Flue brushing

We pull the stovepipe or baffle, then run a chimney brush on flexible chimney rods up the full flue. Glazed creosote gets a wire brush and a creosote sweeping log treatment. We work from the top down so debris falls into the firebox, not into your room.

03

Firebox and pipe cleaning

The ash vacuum pulls soot from the firebox, baffle, and connector pipe. We scrape the firebrick and check the door gasket and glass. If the gasket is flat, we note it on your report and can replace it the same visit for a small parts charge.

04

Camera inspection

An inspection camera goes up the flue to look for cracked flue tiles, gaps in mortar, and liner damage. We photograph anything we find and show you the images on the spot. This step is what separates a real cleaning from a quick brush-and-go.

05

Report and walkthrough

We walk you through what we found, hand you a written report, and tell you when to book the next cleaning. If everything is sound, you are done for the season. If we spotted a chimney cap or crown issue, we quote it before we leave.

Tools & methods

Tools and methods we use

Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.

Chimney brush and rods

A wire brush sized to your flue, run on flexible chimney rods, scrubs creosote and soot off the flue walls from the top down. We carry multiple sizes for 6-inch, 7-inch, and 8-inch flues.

HEPA vacuum and ash vacuum

A HEPA vacuum captures fine ash at the firebox while we brush, and an ash vacuum handles the bulk debris. Together they keep soot out of your living room air.

Inspection camera

A camera on a reel runs the full height of the flue to check flue tiles, mortar, and the stainless steel liner. We photograph anything questionable and show you the images on site.

Creosote sweeping log

A chemical log that breaks down glazed creosote so a brush can remove it. We use it when the flue has shiny, hardened deposits that brushing alone will not touch.

Drop cloths and shoe covers

Canvas drop cloths cover the path from the door to the stove, and shoe covers protect your floors. This is why customers say they cannot tell we were there.

Chimney cap tool and wire brush

A cap tool lets us pull and reseat the cap without damaging the mesh, and a wire brush cleans the cap screen and firebox walls. Both get used on nearly every job.

Real results

Before and after.

Glazed creosote removed from a Barker Neighborhood stove

Before

A homeowner burned two cords of oak last winter and noticed the stove smoking more each month. The flue had a quarter-inch of shiny glazed creosote, and the cap screen was half plugged with soot.

After

We treated the flue with a creosote sweeping log, re-brushed it to bare tile, and cleared the cap screen. Draft improved immediately, and the stove reached 500 degrees Fahrenheit in half the time it took before.

Bird nest cleared from a West Hills flue

Before

A West Hills family smelled smoke in the house every time they opened the stove door. The cap had lost its screen, and a bird had built a nest in the flue over the summer. Draft was almost zero.

After

We pulled the nest, cleaned the flue, and installed a new cap with a stainless mesh screen. The stove drew clean that same evening, and the smoke smell was gone. The whole visit took just over an hour.

Cracked flue tile caught before a reline

Before

A home in Old West Lawrence had a wood stove that had not been serviced in four years. The camera showed a hairline crack in a flue tile near the roofline, plus heavy soot in the smoke chamber.

After

We cleaned the flue, repaired the mortar joint, and documented the repair with photos. The homeowner avoided a $3,200 stainless steel reline because the crack was caught before it spread.

Problems we solve

Problems wood stove chimney cleaning near me Lawrence IN fixes

Most wood stove complaints trace back to a dirty or damaged flue. Here are the four we see most often in Lawrence.

Ask a pro →
01

Creosote buildup in the flue

We brush the flue down to bare tile, treat glazed areas with a creosote sweeping log, and vacuum the debris. After cleaning, we show you the camera footage so you can see the flue is clear. Annual cleaning keeps buildup from returning.

↗
02

Smoke backdraft into the room

We check the cap, clear any animal nest or debris, and verify the flue height meets code. If the stove is the issue, we check the baffle and gasket. Most backdraft calls are solved with a cleaning and a cap screen.

↗
03

Damaged flue liner or cracked tiles

Our camera inspection finds cracks and gaps that a visual check misses. Small mortar repairs can often be done on the spot. If the liner is too far gone, we quote a stainless steel liner replacement and explain the options clearly.

↗
04

Wood stove inefficiency and excess smoke

We clean the flue, check the cap screen, and inspect the door gasket and baffle. Once the draft is restored, most stoves reach temperature faster and burn cleaner. Customers often cut their wood use by a quarter or more.

↗
Proof you can check

Credentials and reviews

✓
CSIA Certified Chimney SweepChimney Safety Institute of America
✓
NFI CertifiedNational Fireplace Institute
✓
NFPA 211 compliant inspectionsNational Fire Protection Association
✓
OSHA safety certificationOccupational Safety and Health Administration
✓
Indiana state licensed contractorState of Indiana
Good questions

Questions Lawrence homeowners ask before booking

(855) 959-5820 →

Most wood stove cleanings in Lawrence run $189 to $279 in 2026. That covers flue brushing, firebox and pipe vacuuming, and a camera inspection. Add $60 to $120 if the flue has heavy glazed creosote or if we need to pull and reseal the stovepipe. Chimney caps, gaskets, and crown repairs are quoted separately before we start.

Once a year if you burn a cord or less, and twice a year if you burn daily from October through March. Lawrence winters are long enough that most wood stove owners should book in late summer and again in mid-winter. If you see shiny black creosote on the flue walls, do not wait for the calendar, call us now.

Every cleaning includes flue brushing with a chimney brush and rods, firebox and stovepipe vacuuming with a HEPA vacuum, a camera inspection of the flue and liner, and a check of the cap, crown, and door gasket. You get a written report with photos. Chimney liner replacement, masonry repair, and cap installation are add-on services quoted on site.

Yes. We tape a HEPA vacuum hose at the firebox and lay drop cloths from the door to the stove before we start. The vacuum captures ash and soot as the brush knocks it loose. When we finish, we wipe down the hearth and do a flashlight walkthrough with you. Most customers say the room looks cleaner than before we arrived.

Ready when you are

Book wood stove chimney cleaning Lawrence IN this week

Creosote does not wait, and neither should you. Call (855) 959-5820 and we will give you a flat price, a two-hour arrival window, and a certified sweep who cleans up after himself. Same-day slots are open most weekdays.

Book my cleaning (855) 959-5820 →
Request an appointment

Contact EmberHarbor Pros

Call (855) 959-5820 or email [email protected] and we will get back to you the same business day. Our phones are answered Monday through Friday, 8 a.m. to 6 p.m., and the emergency line stays open 24/7 for chimney problems in Lawrence. Same-day slots are often available if you call before noon.

Call anytime(855) 959-5820Email the office[email protected]
Office hoursOpen 24 hours · 7 days a week
Tap to call(855) 959-5820